series ame15-maz 15 watt | ac-dc converter www.aimtec.com tel: +1 514 620 2722 toll free: + 1 888 9 aimtec (924 6832) f 052e r8.h 1 of 4 north america only features: ? 4000vac i/o isolation ? rohs compliant ? operating temperature: -40 to +80c ? soft start ? over load, over voltage, short circuit protection ? energy star compliant ? universal input: 90-264vac, 47-440hz ? ce, culus, cb approvals models single output model input voltage (vac/hz) input voltage (vdc) output voltage (v) output current max (a) maximum capacitive load ( f) efficiency (%) ame15-3.3smaz 90-264/47-440 120-370 3.3 3 4700 74 ame15-5smaz 90-264/47-440 120-370 5 3 2200 78 ame15-12smaz 90-264/47-440 120-370 12 1.25 1000 81 ame15-15smaz 90-264/47-440 120-370 15 1 680 81 ame15-24smaz 90-264/47-440 120-370 24 0.63 470 83 models dual output model input voltage (vac/hz) input voltage (vdc) output voltage (v) output current max (a) maximum capacitive load (f) efficiency (%) ame15-5dmaz 90-264/47-440 120-370 5 1.5 1000 78 ame15-12dmaz 90-264/47-440 120-370 12 0.63 470 80 ame15-15dmaz 90-264/47-440 120-370 15 0.5 330 81 input specifications parameters conditions typical maximum units current 115 vac 350 ma 230 vac 180 ma inrush current <2ms (cold start) 115 vac 10 a 230 vac 20 a leakage current 115 vac 0.1 ma 264 vac 0.2 ma external fuse (recommend) slow blow type 2 a input dissipation no load <0.5 w under voltage protection 88 vac output specifications parameters conditions typical maximum units voltage accuracy 2 % line regulation ll-hl 0.5 % load regulation (single) 0-100% 0.5 % cross regulation (dual) 25% load - 1 s t out, 100% load ? 2 n d out 5 % transient recovery time 200 s transient response deviation 25% load step 2 % of vout ripple & noise * 20mhz bandwidth 100 mvp-p hold-up time min 20 ms * ripple & noise measured with 1 f m/c and 47 f e/c isolation specifications parameters conditions typical rated units tested i/o voltage 3sec 4000 vac i solation resistance >1000 m ? cb
series ame15-maz 15 watt | ac-dc converter www.aimtec.com tel: +1 514 620 2722 toll free: + 1 888 9 aimtec (924 6832) f 052e r8.h 2 of 4 north america only general specifications parameters conditions typical maximum units switching frequency 132 khz start up time 900 ms over load protection auto recovery, hiccup mode >131 % over voltage protection zener diode clamp short circuit protection continous short circuit restart auto recovery operating temperature with derating over 55 o c -40 to +80 o c storage temperature -40 to +100 o c max case temperature 100 o c temperature coefficient 0.02 % / o c cooling free air convection humidity 95 % rh weight 100 g dimensions (l x w x h) 2.56 x 1.83 x 0.79 inches 65.0 x 46. 5 x 20.1 mm , 0.5mm mtbf > 400 000hrs (mil-hdbk -217f, t=+25 o c) case material plastic resin + fiberglass (flammability to ul 94v-0) note: all specifications in this datasheet are measured at an ambient temperature of 25c, humidity<75%, nominal input voltage and at rated output load unless otherwise specified. environment approval parameters conditions shock wave form: half sine wave acceleration amplitude: 5gn bump duration: 30 ms number of bumps: 18 (3 in each direction for every axis) converter operation before and after test, body mounted (on chassis) vibrations test mode: sweep sine 10-100hz, speed 0.05hz/s displacement: 1mm acceleration: 3g 3 loops 30min one cycle, 3h total, every axis tested converter operation before and after test, body mounted (on chassis) safety & emc specifications parameters agency approvals culus, ce, cb standards medical electrical equipment iec\en\ul 60601-1 , csa-c22.2 no. 601.1-m90 information technology equipment en 60950-1:2006+a11:2009 emi - conducted and radiated emission en55011, class b harmonic current emissions iec/en 61000-3-2, (en60555-2) voltage fluctuations and flicker iec/en 61000-3-3, (en60555-3) electrostatic discharge immunity iec 61000-4-2 rf, electromagnetic field immunity iec 61000-4-3 electrical fast transient/burst immunity iec 61000-4-4 surge immunity iec 61000-4-5 rf, conducted disturbance immunity iec 61000-4-6 power frequency magnetic field immunity iec 61000-4-8 voltage dips, short interruptions immunity iec 61000-4-11
series ame15-maz 15 watt | ac-dc converter www.aimtec.com tel: +1 514 620 2722 toll free: + 1 888 9 aimtec (924 6832) f 052e r8.h 3 of 4 north america only pin out specifications dimensions (top view) pin single dual 1 no pin no pin 2 ac input (n) ac input (n) 3 ac input (l) ac input (l) 4 -v output -v output 5 no pin common 6 +v output +v output
series ame15-maz 15 watt | ac-dc converter www.aimtec.com tel: +1 514 620 2722 toll free: + 1 888 9 aimtec (924 6832) f 052e r8.h 4 of 4 north america only derating -40 -20 020406080 100 100 80 60 40 20 0 free air convection 55 o c safe operating area ambient temperature o c 85 note: 1. datasheets are updated as needed and as such, specifications ar e subject to change without notic e. once printed or downloaded , datasheets are no longer controlled by aimtec; refer to www.aimtec.com for the most current product specifications. 2. product labels shown, including safety a gency certifications on labels, may vary based on the date manufactured. 3. mechanical drawings and specifications are for reference only. 4. all specifications are measured at an ambient temperature of 25c, humidity<75%, nominal input voltage and at rated output load unless otherwise specifie d. 5. aimtec may not have conduct ed destructive testing or chemical analysis on all internal components and chemicals at the time of publishing this document. cas numbers and other limited information are consi dered proprietary and may not be available for release. 6. this product is not designed for use in critical life support systems, equipment used in hazardous environments, nuclear contr ol systems or other such applications which necessitate specific safety and regulatory st andards other the ones listed in this datasheet. 7. warranty is in accordance with aimtec ?s standard terms of sale available at www.aimtec.com.
|
